NeverWet - Binh Xit Chong Tham - Bình Xịt Chống Thấm

NeverWet - Binh Xit Chong Tham - Bình Xịt Chống Thấm

$59.95 Regular Price
$9.95Sale Price

MUA 2 hộp (1 hộp có 2 chai) TẶNG 1 hộp

Vui lòng để "3" trong ô Quanity và sử dụng Promo Code "BUY2GET1" để nhận được chương trình giảm giá đặc biệt này.

BUY 2 boxes (2 bottles of 1 box) GET 1 box FREE

Please add "3" items on Quantity and use Promo Code "BUY2GET1" to get this special promotion.

  • Application Instructions

    STEP 1: BASE COAT APPICATION

    Shake Base Coat can vigorously for one minute after mixing ball begins to rattle. Shake often during use. If mixing ball falls to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. A test spray on cardboard is recommended to obtain feel for spray pattern. Continue to shake between passes while spraying.

    Spray Base Coat approximately 6-12 inches from the surface. Spray two light passes (right to left, then up and down), taking care not to soak the surface. Continue to shake between passes while spraying.

    Wait for 30 minutes for the Base Coat to dry.

    Apply a second coat if desired, waiting 30 minutes before moving to the next step.

    STEP 2: TOP COAT APPLICATION

    Shake Top Coat can vigorously for one minute after mixing ball begins to rattle. Shake often during use. If mixing ball falls to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. A test spray on cardboard is recommended to obtain feel for spray pattern. Continue to shake between passes while spraying.

    Spray Top Coat over Base Coat approximately 6-12 inches from the surface. Spray two light passes (right to left, then up and down). Continue to shake between passes while spraying.

    Do not over-apply. Soaking the surface will cause pooling of the treatment, discoloration of the object, and will not increase product performance.

    Wait 1-2 minutes and then spray two additional passes (if desired), taking care not to soak the surface. If Top Coat is applied too heavily, the frosted appearance will be more pronounced.

    Cure Time: Wait at least 30 minutes before exposing to water. Highest performance is achieved by allowing NeverWet to cure overnight, or at least 12 hours.

    Clean-Up: After use, turn can upside down and press spray nozzle until spray is clear to prevent clogging. If valve clogs, twist and pull off spray tip and rinse it in a solvent such as mineral spirits. Do not stick a pin or other objects into the stem. Wipe tip off before storing. Clean up wet or dry coating with Xylol or mineral spirits. Throw away empty can in trash pick-up. Do not burn or place in home trash compactor.

Orange County:  7766 Westminster Blvd, Westminster, CA 92683 / (714) 290 5902
San Jose - 2 Location:

Location 1:  2857 Senter Road #D, San Jose, CA 95111 / (408) 499 7523
Location 2:  1111 Story Road #1069, San Jose, CA 95122 / (408) 499 7523

(Inside Grand Century Mall)